Soft material (CQ) is more suitable for complex architectural design due to its good formability properties whereas hard material (SQ) has limited formability. Thus, CSC Steel Sdn. Bhd. offers variety of steel grades ranging from CQ, SQ and Full Hard as compared to other companies.
realcolor® Thermoshield coating system has hydrophilic technology (refer mechanism as shown below) that works by shifting off dirt particles from the coated substrate by preventing dirt particle from sticking, drying and embedding on the surface.
Water contact, Ѳ = 80-90°C
Heat Transfer Mechanism
Generally, solar radiation gives out light and heat to the earth in electromagnetic waves (ultraviolet, visible, and infrared). The majority of the heat comes from the visible and infrared ranges. realcolor® Thermoshield steel can reflect and emit most energy near the infrared spectrum. This product helps to reduce the potential of heat being absorbed into a structure and keep the shelter environment cool.
GI coating using purely Zinc, which shall provide more protection to steel substrate through the sacrificial loss of Zinc in the vicinity of the exposed substrate (cut edge and scribes) as compared to GL. GL coating is more fragile and cracks easily at bent areas, resulting in steel metal being exposed to atmospheric elements in these areas.
Cut Edge Protection - Galvanic protection will in place until all the Zinc has been consumed
Furthermore, GL is also poor in alkaline resistance compared to GI. Therefore, GL is not suitable to be used in agriculture facilities.
PPGI that are produced under CSC STEEL brand realcolor® Primero/Thermoshield/Supreme have been properly designed, manufactured and tested to have outstanding performance when compared to PPGL under the same environmental conditions. 2000hrs of salt spray test (SST) simulating the corrosion resistances of realcolor® Primero versus PPGL panel has been made and results are presented as below.
Life span of metal roofing can be extended by cleaning the paint film surface at least annually with mild detergent or clean neutral water. Paint film surface must not be cleaned with abrasive or chemical cleaners.
There are a number of simple steps that can greatly reduce or eliminate the formation of white rust. These are:
Touch up paint can be used to repair or cover up minor scratches. For further information, please contact technical person from CSC Steel Sdn. Bhd.
If you are a visitor to the website, you are allowed to access the website without providing any personal information. For your necessities to get the website’s services and ensuring the website to provide necessary services continuously, the website will collect your personal information.
Personal Data refers to any information which relates directly or indirectly to you. This includes any information that can be used to distinguish, identify or contact you. The personal information collected by us include, but are not limited to, the following:-
When you visit the website or use the services provided by the website, we will ask you to provide necessary personal information with regards to the service essence, and only process and use your personal information within specific purpose and ambit; the website will not use your personal data for other purposes without your agreement.
The website will keep your name, email address, contact information and usage time while you use interactive functions such as service mailbox or questionnaires.
During browsing, the website will automatically keep records of equipment’s IP address, usage time, browser type and browsing history, etc. All those records are for internal application traffic analysis only, will not be published, not be associated with specific individual, and will not be analyzed for specific record.
Other than personal information obtained from you directly (as detailed above), we may also obtain your personal information from third parties we deal with or are connected with you (credit reference agencies or financial institutions), and from such other sources where you have given your consent for the disclosure of information relating to you, and/or where otherwise lawfully permitted.
In order to provide accurate services, we will analyze collected questionnaires and data. Except for internal research, the analysis result of statistical data or explanatory will be published without involving any specific individual information if necessary.
By providing your personal information to us and/or continuing access to the website, you declare that you have read and understood this Policy and agree to us processing your personal information in accordance with the manner as set out in this Policy.
We endeavor to protect the website and your personal information with reasonable technology, procedures and related information security equipment and necessary measures. Only authorized personnel can access your personal data. All of related personnel will sign confidentiality contract, and will be subject to related legal actions if violating the confidentiality obligations.
When it is necessary to entrust other organizations to provide services due to business needs, the website will request those organizations to take appropriate security maintenance measures and comply the confidentiality obligations. We will take every necessary inspection procedures to ensure those measures and obligations will be complied.
While we are committed to protecting your personal data, we do not guarantee unauthorized or accidental access to such data.
This website will not provide, exchange, rent or sell any of your personal data to any third party save and except where there is a legal basis or contractual obligations including but not limited to the following circumstances:-
We may however disclose your personal information to the following parties in the course of using the information for the reason it was collected:-
In the course of our business, we may need to transfer your personal information outside of Malaysia.
The circumstances of the preceding paragraph include, but are not limited to:
You consent to us transferring your personal information outside Malaysia in these instances. We shall take reasonable steps to ensure that any of such overseas entities are contractually bound not to use your personal information for any reason other than to provide the Products and/or Services they are contracted by us to provide and to adequately safeguard your personal information.
The parties to the collection of personal data on the website may exercise the following rights in accordance with the Personal Data Protection Act:
However, this is not the case for those who are required to perform duties or business on the website.
If you have any questions about the privacy statement of the website or related matters related to your personal information, please contact:
Data Processor /Privacy Officer’s contact:
Address: CSC STEEL HOLDINGS BERHAD
180, Kawasan Industri Ayer Keroh, Ayer Keroh,
75450 Melaka, Malaysia.
Office Hours: Monday to Friday 8.00am to 5.30 p.m. (except Public Holidays)